- 17 -
FUNCTIONAL TESTING AND VERIFICATION
If the software was installed properly you should see a yellow icon
in the windows notification tray (see the image below). The mode
should be “standby”.
Please check the troubleshooting section if it is not present.
Click on the notification tray and select the “Cryo” mode – the icon
should turn to green and there should be a green LED slow blinking
on the cooler.
WARNING!
Given that the CPU is cooled by the EK-QuantumX Delta TEC
directly to achieve low temperatures, the rest of your liquid
cooling loop will be under stress from the TEC plate. Do not
use your CPU temperatures as a baseline for your Fan or
Pump speeds! It is best to monitor the coolant temperature
or set the fans and pump at a fixed speed level!
