/ 21 /
STEP 2
Align the holes of the radiator and fans with the ones in the PC chassis.
Take four (4) UNC 6-32 x 30mm screws for each fan and guide them
through the holes of the chassis and fans, then screw them into the
threaded holes of the radiator. Tighten them in a clockwise direction
using the enclosed Allen key.
UNC 6-32 x 30 Screw
Radiator
Fitting Barb
Fitting Ring
STEP 2
STEP 3
STEP 3
Install compression fittings on both G1/4 openings of the radiator.
Tighten the fitting barbs in the clockwise direction until the gasket
underneath is compressed.
The installation of the radiator and its cooling fans is now complete.