/ 16 /
STEP 3
If already installed, please remove the motherboard from the computer
case. Place it on an even surface with the front facing downward.
STEP 4
Removing the Original Hold-Down Clamps
Using a Philips head screwdriver, remove the four UNC 6-32 screws
securing the original plastic hold-down clamps around the socket
(as shown in the picture). You can use the factory backplate for
mounting the EK-Supremacy Classic water block.
AMD® Factory
Backplate
UNC 6-32
Screws
Hold-Down
Clamps
STEP 3
STEP 4