EKSA H6, User Manual

Page: 14 / 23

EN
Please read and keep all safety and use instructions.
Do NOT use the headphones at a high volume
for any extended period.
– To avoid hearing damage, use your head-
-phones at a comfortable, moderate
volume level.
– Turn the volume down on your device before
placing the headphones in/on your ears, then
turn the volume up gradually until you reach
a comfortable listening level.
Do NOT use your headphones while driving for
phone calls or any other purpose.
Do NOT use the headphones at any time the
inability to hear surrounding sounds may
present a danger to yourself or others, e.g.,
while riding a bicycle or walking in or near
traffic, a construction site or railroad, etc.
– Remove the headphones, to ensure you can
hear
surrounding sounds, including alarms and
warning signals.
– Be aware of how sounds that you rely on as
reminders or warnings may vary in character
when using the headphones.
Do NOT use the headphones if they emit any
loud unusual noise. If this happens, turn the
headphones off and contact EKSAtelecom
customer service.
Remove headphones immediately if you
experience a warming sensation or loss of audio.
Do NOT use mobile phone adapters to connect
headphones to airplane seat jacks, as this could
result in injury or property damage due to
overheating.
Do NOT use the headphones as aviation
communication headsets except in case of
emergency.
– No incoming audio will be heard with a
discharged or improperly installed battery.
This could result in the potential of missed
communications while piloting an aircraft.
– Extremely loud ambient noise levels common
to many propeller-driven aircraft may impair
your ability to receive incoming audio
communications, particularly during takeoff
and climb out.
– The headphones are not engineered for noise
conditions, altitude, temperature or other
environmental conditions common in
non-commercial aircraft, resulting in possible
interference to critical communications.
Contains small parts which may be a
choking hazard. Not suitable for children
under age 3.
This product contains magnetic material.
Consult your physician on whether this
might affect your implantable medical
device.
To reduce the risk of fire or electrical shock, do
NOT expose this product to rain, liquids or
moisture.
Do NOT make unauthorized alterations to this
product.
Use this product only with an agency approved
power supply which meets local regulatory
requirements (e.g., UL, CSA, VDE, CCC).
Do not expose products containing batteries to
excessive heat (e.g. from storage in direct
sunlight, fire or the like).
NOTE : This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures: