background image

 

 

   

  

DK50 

4VR/50 

NP-DK50 4VR50-11_04-2018 

- 4 -    

04/2018

 

 

3. 

ALERT NOTICES AND SYMBOLS 

In the Installation, Operation and Maintenance Manual and on packaging and product, the following labels or 
symbols are used for important information: 
 

 

Attention, see instructions for use 

 

Caution, risk of electric shock 

 

Consult instructions for use 

 

CE mark of compliance 

 

Compressor is remote-controlled and may start without warning 

 

Caution!  Hot surface 

 

Earth (ground) connection 

 

Terminal for ground connection 

 

Fuse 

 

Alternating current 

 

Handling mark on package – FRAGILE  

 

Handling mark on package – THIS SIDE UP   

 

Handling mark on package – KEEP DRY 

 

Handling mark on package – TEMPERATURE LIMITATIONS 

 

Handling mark on package – LIMITED STACKING 

 

Mark on package – RECYCLABLE MATERIAL 

 

4. 

STORAGE AND TRANSPORT   

The compressor is shipped in cardboard that protects the appliance from damage during transport.  
 

Caution! For transport, always use the original packaging and secure the  compressor 
in the upright position.  

 
Protect the compressor from humidity and extreme temperatures during transport and storage. 
A compressor in its original packaging can be stored in a warm, dry and dust-free area. Do not 
store near any chemical substances. 
 
Keep  packaging  material  if  possible.  If  not,  please  dispose  of  the  packaging  material  in  an 
environmentally friendly way and recycle if possible.     
 

Caution! Before moving or transporting the compressor, release all the air pressure from 
the tank and hoses and drain the condensed water. 
 
 
 
 

 

Summary of Contents for DK50 4VR/50




























Reviews: