FUEL BED LAYOUT
(continued)
3. Locate the two front coal sections
marked ‘L’ and ‘R’ into the slot along the
front of the burner tray as shown. The legs
of the coals have a slightly tapered front
face which is intended to give a tight inter-
ference fit into the tray.
Do not alter the slot in the tray front, so
that the coals become a loose fit.
4. Open the bag of 16 moulded coals.
All of the coals are the same. Take six
coals and place them as shown. Care
should be taken to ensure that the
coals bridge the gap between the front
coal and the four coal supports at the
front of the matrix.
5. Take five more moulded coals and posi-
tion as shown along the rear of the matrix.
Do not place the coals directly over the
holes in the matrix. The coals may be rotat-
ed as desired to ensure they sit firmly on
the various supporting parts of the matrix.
6. Finally, take the five remaining coals
and position as shown. These coals
should rest on the front and rear rows
of coals, rather than sitting directly on
the matrix. Adding these coals should
complete the appearance of the fuel
bed giving an even distribution of
equally spaced coals.
The fire is designed to operate correctly with the sixteen coals supplied when assembled accord-
ing to the instructions. Never add to the sixteen coals, or change them for a different type. Never
throw rubbish or other matter onto the fuel bed. Please note: some discolouration/sooting is to be
expected during normal use.
3
5.0
R
L
©
2009 Focal Point Fires plc.
