background image

7095-819

 1

Quadrafire  •  Expedition II AU Owner’s Manual_Rev B  •  2020 - ___  •  03/21

Owner’s Manual

Operation & Care

INSTALLER: Leave this manual with party responsible for use and operation.

OWNER: Retain this manual for future reference.

Contact your dealer with questions on installation, operation, or service.

EXPEDITION II AUSTRALIAN 

WOOD INSERT

AUTOMATIC COMBUSTION 

CONTROL (ACC)

MODEL NUMBER:

EXPEDITIONII-AU

®

• 

Do not store or use gasoline or other flammable vapors 

and liquids in the vicinity of this or any other appliance.

• 

Do not over fire - If appliance or chimney connector 

glows,  you  are  over  firing.  Over  firing  will  void 

your warranty.

• 

Comply with all minimum clearances to combustibles 

as specified.

Failure to comply may cause house fire.

If the information in these instructions is 

not  followed  exactly,  a  fire  could  result 

causing property damage, personal 

injury, or death.

WARNING

!

HOT SURFACES!

Glass and other surfaces are hot during 

operation AND cool down.

WARNING

!

Hot glass and appliance will cause burns.

• 

Do not touch glass until it is cooled

• 

Use leather gloves when reloading fuel

• 

NEVER allow children to touch glass

• 

Keep children away

• 

CAREFULLY  SUPERVISE  children  in  same  room 

as appliance.

• 

Alert  children  and  adults  to  hazards  of 

high temperatures

•  High temperatures may ignite clothing or other 

flammable materials.

• 

Keep  clothing,  furniture,  draperies  and  other 

flammable materials away.

Fire Risk.

For use with solid wood fuel only.

Other  fuels  may  over  fire  and  generate 

poisonous gases (i.e. carbon monoxide).

WARNING

!

NOTICE: DO NOT DISCARD THIS MANUAL

Summary of Contents for EXPEDITIONII-AU



































Reviews: