15
8.3Lifting up
Pls don
’
t overload,The related capacity is 1800KG .Only increase the load
capacity allowed by the load capacity graph
Pull the joystick in the B direction (Figure 10.2) to realize the lifting of the cargo.
Extend the fork to the bottom of the cargo, and then raise the fork to a suitable
height. Retract the fork without touching the fork and the cargo with the straddle
legs. Only when the fork is retracted then you can continue to lift the cargo to the
desired height height. This operation needs to be performed with the foot switch
(Figure 7.6) depressed.
8.4Lifting down
If the fork is on the shelf ,carefully Move the car with the pallet rack or move the
car off the shelf separately
,Then Operate the joystick carefully, lower the cargo
in the F direction (Figure 10.2) until the forks leave the pallet rack, and then
carefully drive the truck away from the cargo. This operation needs to be
performed with the foot switch (Figure 7.6) depressed.
8.5Fork move forward /backward/Left/Right
After stepping on the foot switch (Figure 7.6), press the button (Figure 8.1) to
move the fork forward.
After stepping on the foot switch (Figure 7.6), press the button (Figure 8.2), and
the fork moves backward.
After stepping on the foot switch (Figure 7.6), press the button (Figure 8.5), and
the fork moves to the right.
After stepping on the foot switch (Figure 7.6), press the button (Figure 8.6), and
the fork moves to the left.
8.6Fork Tilt forward /back ward
After stepping on the foot switch (figure 7.6), press the button (figure 8.3) to tilt
the fork forward.
!