16
After stepping on the foot switch (figure 7.6), press the button (figure 8.4), and
the fork will tilt backward.
8.7Traveling
Only drive on the slope when the cargo are facing up
Don
’
t drive on the slope in excess the specified specifications .
Only can driving when the fork falls to the lifting point (<11.81Inch)
The fork must be retracted before being allowed to travel under heavy
load.
Fig 12 Driving direction
Turn the inserted key to the "open" position (Figure 9). Finally, carefully pull up
the emergency stop button (Figure 7.3) to start the truck. Move the handle to the
operating area (‘Fw’, Figure 12).
Move the operating handle to the desired forward direction ‘F’ or backward
direction ‘B’ (Figure 12).
Control the driving speed by carefully moving the joystick (Figure 10.1) until the
desired speed is reached.
If you move the joystick back to the middle position 0 (Figure 12) or release the
foot switch, the controller will slow the truck until it stops. If the truck stops, the
parking brake starts to work.
Drive the truck carefully to the destination. Observe the road surface and adjust
the driving speed through the handle.
！
