background image

 

Brake 

 

1. Left baseboard 2. Brake shoe 3. Brake cylinder          4.adjustable Spring         

5.return spring      6. Hand brake adjusting mechanism 7.hand brake return spring 

8.spring tab letting        9.pressure lever              10.tension spring              11.pull rod 

stop block 12.Jaw dust cover 

The parking brake is mainly used for parking state, to prevent accidents caused 

by slip slope. Equipped with a limit switch on the parking brake, the control circuit is 

closed under a parking state. The parking brake must be released before starting to 

walk, only after that the control circuit can be switched on. The parking brake has 

adjustable elastic function. 

2.2.4 Operating system 

The main working part of the forklift is forks. The forks realize the loading and 

unloading, stacking and short-distance transportation for pallets or cargo. 

Forks mounted on the carriage, by chain drive or inner mast moves up and down, 

the carriage makes the goods off the ground or stacked on shelves. The chain 

transmission and inner mast overall movement are achieved by the stretching of the 

lift cylinder. Forklift operation process is achieved by stretching of the control 

cylinders (including tilt action). 

Cylinder movement is controlled by a manual valve stem, and the pressure oil is 

provided by the pump station. 

The safety valves in the circuit of lifting cylinders and tilt cylinder slow down 

the speed of mast lifting and falling or tilting forward, which ensures the safety drop. 

2.3 Electrical principle 

2.3.1 Electrical system 

Forklift electrical system includes walking and operation control, and lighting. 

Forklift adopts America CURTIS1232 AC control assembly. 

Summary of Contents for EK13A





























Reviews: