background image

14 

 

When vehicles out of control on the moving or having smoking and anxious burnt 

flavor in the using, please pressed emergency switch on the dashboard shut off. Find 

out the reason and clear fault than to open. The method of the opening: turn the red 

button as clockwise, pop-up button up, open end.   

Emergency power switch button for plastic parts, press down or clockwise not too 

hard, so as not to damage the switch.   

3.4.6 The use of speakers and reversing speakers   

For the safety of driving, vehicle equipped with speakers and reversing speakers. To 

remind others when driving, the steering wheel in the middle of the horn button, when 

walking vehicle reversing, reversing the horn alarm sound will start automatically 

alert pedestrians.   

3.4.7 The operation of the hydraulic control rod   

Hydraulic control rod is for hydraulic transmission parts distributor of different needs, 

there are two files, joystick is divided into the following functions:   

(1) Pallet fork lift lever: a. fork to ascend (after); b. fork remains; c. fork lower (push)   

(2) Tilt lever: a. hypokinesis (after); B. stay in situ; C. forward (push)   

Every joystick can only manipulate a hydraulic circuit. Joystick when dial, with micro 

switch will start the oil pump motor rotating at the same time, the output pressure of 

hydraulic oil, make the related hydraulic components. In order to ensure the safety of 

hydraulic system pressure, the hydraulic valve block is equipped with pressure relief 

devices, once set pressure exceeds standard, control valve block automatically 

unloading overflow.   

Note: the pressure of the hydraulic valve block device, cannot adjust at will!   

3.4.8 Battery capacity indicator   

The dashboard for forklift battery capacity has capacity display function, can also use 

electricity time statistics (cumulative hour). 

3.4.9 Handling stacking operation   

(

) How to transport the goods pile on weight   

Will forklift drive to the front of the items which need to carry slowly , make fork 

parallel to the ground, lifting the fork to height, it can be inserted into the freight 

Summary of Contents for EK13A





























Reviews: