EKKO EK13A, Manual

Page: 13 / 28

13
○
7 When forklift driving turn, should reduce speed, where possible, try not to
turn.
○
8 Forklift truck carrying gradeability is 10%, so the uphill slope need to
understand the situation, when climbing the forklift must accelerator pedal pressed
down as far as possible, the maximum climbing force can be achieved.
○
9 Forklift in the process of downhill, loosen the accelerator pedal, in order to
obtain the reverse braking current, if the reverse current can't control the downhill
braking speed. Please on the brake pedal at the same time, to ensure safety.
○
10When stopping driving f, leave the accelerator pedal, right foot on the pedal
until the forklift stop completely. Put the pallet fork in the lowest position, taut hands
in the car, press the safety switch, pull out the key.(Note that can't leave without a taut
hand brake lever forklift).
3.4.2 The steering wheel Angle adjustment
According to the individual operating habits, steering wheel angle can be adjusted .
Adjustment method is as follows: Loosen the left hand of direction column, adjust the
steering wheel to the right position, then lock regulating handle.
3.4.3 Accelerator pedal operation
Determine the vehicle forward or backward. Toggle joystick in place, right foot will
tread the foot pedal accelerator to make the vehicle slowly forward or backward.
Continue down the pedal, the vehicle's speed to speed up. Started never put foot
accelerator jammed on to the end, in order to avoid the vehicle out of control.
3.4.4 Brake pedal operation
When the vehicles need parking in moving , loosening the foot accelerator, Will move
to the right foot on the brake pedal in the middle to depress and the vehicle will stop
after .
3.4.5The using of emergency power safety switch