background image

 

- 3 - 

- 3 - 

 

1. The correct use of electric stacker

 

Described  in  this  manual  of  the  full  electric  walkie  straddle  stacker.  This 
equipment is to reduce the handling and transportation of your load efficiently. 
Improper use may result in personal injury or damage of the machine. 
 
The  operator  must  ensure  proper  usage  and  be  authorized  and  trained  before 
use. This stacker should always be on a flat surface while lifting any material. 
This  stacker  should  be  used  in  room  temperature  environments.  Not 
recommended  for  operation  and  lifting  on  slopes.  Loads  should  always  be 
centered within the 24” load center from backrest. It is strictly prohibited to lift 
or  carry  personnel.  Load  of  material  must  be  reduced  to  the  max  lifting  point 
(138in). 
Rated load is in the load curve on the label of the unit. The operator should pay 
attention to these warnings and safety instructions.   

Changing: 

Load ratings affect the stability and safety of the operations of this equipment. 
This includes the effects of the changes, such as: brake, steering, Increase  the 
visibility  and  mobile  accessories.  When  the  manufacturer  or  its  successor 
approved  modify  or  change,  load  curve,  label,  the  identification  mark, 
operation and maintenance manuals will be corresponding to the changes. 
Any  changes  made  or  damaged  due  to  misuse  of  this  products  will  lose  the 
warranty.   
 

1.1An overview of 1.1 main parts 

                                                                           
 

   

Fig 1: The main component overview 

   

 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

Summary of Contents for EB12EA Series


















Reviews: