- 14 -
- 14 -
If you need to replace the wheel, please follow the above instructions. Caster must be and no
abnormal wear round.
Check and maintain the list of items on the list.
7.1. Maintain inventory
Table4: Maintain inventory
The interval of time
(month)
1
2
6
12
1
Check the hydraulic oil cylinder, for noise and leakage
damage
●
2
Check the hydraulic connections and tubing for damage and
leakage
●
3
Check the hydraulic oil level, then re-fill if necessary
●
4
Fill the hydraulic oil (12 months or 1500 hours)
●
5
Check and adjust the pressure valve function (0/
+10%)
●
Mechanical system
6
Check the deformation and crack of fork
●
7
Check the deformation and crack of the chassis
●
8
Check all the screws are torqued completely
●
9
Check the mast and the chain for corrosion, deformation
damage, replace if necessary
●
10
Check for noise and leakage of gear box
●
11
Check for wheel deformation or damage, replace if necessary
●
12
Steering bearing lubrication
●
13
Check and lubrication center point
●
14
Grease nozzle
●
15
Protective and / or protection board, if damaged replace
●
15
The electrical system
16
Check for any wiring is damage
16
Check if any wire is damaged
●
17
Check the electrical connectors and connecting terminal
●
18
Detection of the emergency stop switch function
●
19
Check the electric drive motor noise and damage
●
20
Detection display
●
21
Check the use of the correct fuse, replace if necessary
●
22
Test buzzer
●
23
Check the current contactor
●
24
Check for leakage of the frame (insulation test)
●
25
Check the accelerator function and wear
●
26
Check the drive motor of electric system
●
