background image

 

- 7 - 

- 7 - 

 

D. Data plate 

 
1 Name, type                                                                          7 Minimum / maximum battery weight 
2 Serial number                                                                      8 Rated power (kW) 
3 Rated capacity (ib)                                                              9 Load center distance                                   
4 Supply voltage (V)                                                            10 Manufacturing parameters 
5 No battery weight (weight) (ib)                                        11 Optional 
6 The name and address of manufacturer 

 
 
 
 
 
 
 
 
 
 
 
 
 

2.Warning, safety instructions 

Warning-----Please do not: 

1. Travel, with a load above (<11.8in). 
2. Avoid putting your foot or hand within any lifting mechanism. 
3. Avoid non-operating personnel near the equipment while traveling or lifting / lowering. 
4. Avoid your foot in the front of the wheels.   
5. Must be cautious when using this equipment on a slope .   
6. Lateral load or tail load should be with caution.   
8. The goods must be evenly distributed on both forks with center of load at 24” to avoid unstable, 
and unbalanced loads. 

Safety instructions 

1. Charging must me AC voltage of 110V outlet or outside the 220V. 
2. Observation of different ground level and dips when operating. The goods may tip, or the stacker   
may lose control. Please check the load from time to time. If the goods become unstable you should 
immediately stop the operation of the vehicle and re-center or secure it.   
3.  When  the  goods  on  the  stacker  starts  sliding.  Immediately  press  down  on  the  emergency  stop 
switch. 
4.  Always  perform  maintenance  work  according  to  the  regular  inspection.  Recommended  use  this 
stacker in the dry environments for longevity. 
5. Always be trained to operate this stacker and wear protective gear and safety shoes. 
6. This stacker is suitable for room temperature b5 C to + 40 C indoor use.   

Summary of Contents for EB12EA Series


















Reviews: