EKKO EB12E Series, User Manual

Page: 15 / 18

- 14 -
- 14 -
- 14 -
7.1. Maintain inventory
Table4: Maintain inventory The interval of time
(month)
1 2 6 12
1
Check the hydraulic oil cylinder, the piston is there noise and
leakage damage
●
2
Check the hydraulic connections and tubing for damage and
leakage
●
3 Check the hydraulic oil level, then fill if necessary
●
4 And then filled with hydraulic oil (12 months or 1500 hours)
●
5 Check and adjust the pressure valve function (0/
+10%)
●
Mechanical system
6 Check whether the deformation and crack of fork
●
7 Check whether the deformation and crack of the chassis
●
8 Check all the screws are fixed completely
●
9 Check the door frame and the chain if there is corrosion,
deformation or damage, replace if necessary
●
10 Check whether the noise and leakage of gear box
●
11 Check whether the wheel deformation and damage, replace if
necessary
●
12 A steering bearing lubrication
●
13 Check and lubrication center point
●
14 Grease nozzle
●
15 Protective and / or protection board, if damaged, replace
●
15
The electrical system
16 Check the wire is damaged
16 Check the wire is damaged
●
17 Check the electrical connectors and connecting terminal
●
18 Detection of the emergency stop switch function
●
19 Check whether the electric drive motor noise and damage
●
20 Detection display
●
21 Check whether the use of the correct fuse, replace if necessary
●
22 Test buzzer
●
23 Check the current contactor
●
24 Check whether there is leakage of the frame (insulation test)
●
25 Check the accelerator function and wear
●
26 Check the drive motor of electric system
●
Brake system
27
Check the brake performance, brake disc replacement or
adjustment gap if necessary
●
Battery
28 Check the battery voltage ●
29
Clean and give the terminal grease, check whether there is
corrosion and damage
●
30 Check the battery shell is damaged ●
Charger
31 Check the main power line is damaged
●
32 Start protection program check during charging
●
Function