background image

SAFETY SYMBOLS

SAFETY SYMBOLS

This manual uses the safety symbols below. They denote critical information. Please read them 
carefully.

WARNING

Failure to abide by the information in a WARNING may result in serious 
injury and can be life threatening.

CAUTION

Failure to abide by the information in a CAUTION may result in moderate 
injury and/or property or product damage.

Indicates a prohibited action.

Indicates to ground for safety.

•  Power supplied equipment can emit electromagnetic waves, that could influence, limit or 

result in malfunction of the monitor. Install the equipment in a controlled environment, where 
such effects are avoided. 

•  This is a monitor intended for use in a medical image system. It does not support the display 

of mammography images for diagnosis.

•  This product has been adjusted specifically for use in the region to which it was originally 

shipped. If operated outside this region, the product may not perform as stated in the 
specifications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in 
any form or by any means, electronic, mechanical, or otherwise, without the prior written 
permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information 
confidential unless prior arrangements are made pursuant to EIZO Corporation's receipt of 
said information. Although every effort has been made to ensure that this manual provides up-
to-date information, please note that EIZO monitor specifications are subject to change without 
notice.

Macintosh and Mac OS are registered trademarks of Apple Inc. 
Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United 
States and other countries.
VESA is a registered trademark or a trademark of Video Electronics Standards Association in 
the United States and other countries.
EIZO, the EIZO Logo, ColorEdge, DuraVision, FlexScan, FORIS, RadiForce, RadiCS, RadiNET, 
Raptor, and ScreenManager are registered trademarks of EIZO Corporation in Japan and other 
countries.
All other company and product names are trademarks or registered trademarks of their 
respective owners.

Summary of Contents for RadiForce S110





















































Reviews: