PRECAUTIONS
WARNING
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Failure to do so may result in fire or electric shock.
Use the correct voltage.
• The unit is designed for use with a specific voltage only. Connection to another voltage than
specified in this User’s Manual may cause fire, electric shock, or equipment damage.
Power supply: 100-120/200-240Vac 50/60Hz
• Do not overload your power circuit, as this may result in fire or electric shock.
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord
may result in fire or electric shock.
For the electrical safety, do not connect or disconnect the power cord in the presence
of patients.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user's manual of the arm stand and
install the unit securely.
Not doing so may cause the unit to become unattached, which may result in injury or
equipment damage. Before installation, make sure that desks, walls, and others an arm stand
is fixed on have adequate mechanical strength. When the unit is dropped, please ask your
dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in
fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten
them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the
eyes or mouth.
If any part of the skin or body comes in direct contact with the panel,
please wash thoroughly. If some physical symptoms result, please consult
your doctor.
