Eizo FORIS FS2332 -, User Manual

Page: 39 / 63

39
Chapter6Troubleshooting
Imaging problems (for both digital and analog)
Problem Possible cause and remedy
3. The screen is too bright or too dark. • Use“Brightness”or“Contrast”intheSettingmenuto
adjustit.(TheLCDmonitorbacklighthasalimitedlife
span.Whenthescreenbecomesdarkorbeginsto
flicker,contactyourlocaldealer.)
• TurnontheAutoEcoViewfunction.Themonitor
detectstheenvironmentalbrightnesstoadjustthe
screenbrightnessautomatically.
4. Characters are blurred. • CheckwhetherthePCisconfiguredtomeetthe
resolutionandverticalscanfrequencyrequirements
ofthemonitor(see
“2-1.CompatibleResolutions/
Formats”(page13) ).
• Use“Smoothing”intheSettingmenutoadjustit(see
“Tomodifyblurredcharacters/lines“Smoothing””
(page27)
).
5. Afterimages appear. • AfterimagesareparticulartoLCDmonitors.Avoid
displayingthesameimageforalongtime.
• Usethescreensaverorpowersavefunctiontoavoid
displayingthesameimageforextendedperiodsof
time.
6. Green/red/blue/white dots or defective
dots remain on the screen.
• ThisisduetoLCDpanelcharacteristicsandisnota
failure.
7. Interference patterns or pressure marks
remain on the screen.
• Leavethemonitorwithawhiteorblackscreen.The
symptommaydisappear.
8. Noise appears on the screen. • IntheSettingmenu,set“Overdrive”to“Off”(see “To
setoverdriveintensity“Overdrive””(page23) ).
• WhenenteringthesignalsofHDCPsystem,the
normalimagesmaynotbedisplayedimmediately.
9. The screen is whitish or blackish. • Use“ColorSpace”ofthe“Screen”submenu(forthe
HDMIinput),“BlackLevel”(see “Toadjustblacklevel
“BlackLevel””(page17) ),and“Contrast”(see “Toadjust
contrast“Contrast””(page17) )intheSettingmenuto
adjustit.
Imaging problems (for digital only)
Problem Possible cause and remedy
10. The color shown on the display is not
correct (for HDMI input).
• Changethecolorspaceofthevideosignalin“Screen”
-“ColorSpace”undertheSettingmenu.
11. The screen flashes (for HDMI input) • Transmittablesignalsdifferonthecategoryofthe
HDMIcable.CheckwhetherthecablesupportHigh
Speed.