Eizo FLEXSCAN SX2762W, User Manual

Page: 27 / 60

27
Chapter3SettingMonitor
●
To connect DVI (Simple display of HDMI signal from digital camera)
An HDMI signal from a digital camera can be simply displayed by means of connecting this product and the
digital camera using a DVI-HDMI converter cable.
Attention
• For displaying the PC signal, “Single Link” or “Dual Link” should be set.
Procedure
1. Press to turn off the monitor.
2. Holding
down, press for at least two seconds to turn on the monitor.
The “Optional Settings” menu appears.
3. Choose “Signal Selection” from “Optional Settings”, and press .
4. Select “DVI” with or , and press .
5. Select “Signal Format” with or , and press .
6. Select “HD Video” with or , and press .
7. Press twice.
8. Select “Finish” with or .
9. Press
.
The “Optional Settings” menu is closed.
●
To connect DisplayPort / Mini DisplayPort
Procedure
1. Press to turn off the monitor.
2. Holding
down, press for at least two seconds to turn on the monitor.
The “Optional Settings” menu appears.
3. Choose “Signal Selection” from “Optional Settings”, and press .
4. Select “DisplayPort” with or , and press .
5. Select “Signal Bandwidth” with or , and press .
Use or to select or just confirm the signal bandwidth setting for the frequency that corresponds to your graphics
board.
Setting
Horizontal scan frequency
(kHz)
Vertical scan frequency (Hz)
Normal 26to89 59to61
Wide 26to89 23.75to63
6. Press .
7. Press twice.
8. Select “Finish” with or .
9. Press
.
The “Optional Settings” menu is closed.