Eizo FLEXSCAN L771 -, User Manual

Page: 15 / 53

2. CABLE CONNECTION
15
ENGLISH
2-2. Connecting the signal cable
• Be sure that the power switches of both the PC and the monitor are OFF.
1.
Remove the rear cover from the monitor.
When removing the rear cover, push down the buttons while pulling.
2.
Plug the signal cable into the D-Sub connector at the rear of the
monitor and the other end of the cable into the video connector on the
PC.
After connecting, secure the connection with the screw-in fasteners.
buttons
Signal Cable (enclosed)
Power cord
Macintosh Adapter (Optional)
Video Output Connector
D-Sub mini 15 pin
·Standard graphics board
·Macintosh G3 (Blue & White) / G4
Macintosh
Video Output Connector
D-Sub 15 pin