E
7
INTRODUCTION
INTRODUCTION
About This Manual
This manual explains the precautions, specifications, and operation of your EIZO
monitor. Please read through this manual as it will help you to get the most out of your
monitor.
Package Contents:
• If any of the above-listed items are missing or damaged, please contact
your local dealer for assistance.
Controls & Connectors:
Front
Rear
Power Cord
EIZO CRT
Utility Disk
User’s Manual
Warranty
Registration
Card
Signal Cable
(MD-C87/
MD-C100)
Power Connector
D-Sub Mini 15 Pin
Input Connector
QuickSet
™
Control Pad
(hereinafter “Control Pad”)
AUTO-SIZING/Fine Contrast
Setting Button
The “Button Setting” menu
switches this button’s function
(Auto-Sizine or Fine Contrast). See
page 18.
Power Switch
BNC/D-SUB Selection
Button
Selects BNC or D-Sub
connector as active input.
This feature is only used
when two computers are
connected to the monitor.
Termination switch
Allows multiple monitors
to be chained together
(Default termination is
75 Ohm).
Maintenance port
Allows EIZO
optional utilities to
be attached.
Power Terminal Covers for the Optional
i·Sound Sound Unit
BNC Input Connector
Power Indicator
Indicates the power-on status, as follows:
Green:
Power is ON (normal mode)
Green:
PowerManager Mode 1
(flashing) Power is switching off within
15 minutes. See page 20.
Yellow:
PowerManager Mode 2
Yellow:
Power is OFF
(flasing)
(main power is ON)
