- 36 -
Chapter 4 Administrator Settings
4-2. Functions of the “Administrator Settings” Menu
Function
Setting Range
Description
Note
Auto Input Detection
On
Off
This monitor recognizes the connector through which PC signals
are input and displays images on the screen accordingly. When
a PC is turned off or enters power saving mode, any other
available signal is displayed automatically.
When this function is set to “Off”, the monitor displays the signal
from the selected connector regardless of whether a signal is
input or not. In this case, select the input signal to display using
the
operation button on the front of the monitor.
•
When set to “On”, the monitor only enters power
saving mode after all connected PCs have entered
power saving mode or have been switched off.
DP HPD Control
On
Off
When a PC is connected via the DisplayPort connector, window
and icon positions may shift when power is turned off/on or after
recovering from power saving mode. If this happens, set this
function to “On”.
•
This setting can also be changed using the
operation buttons on the front of the monitor.
1. Turn on the monitor.
2. After confirming that the operation guide is not
displayed, press the leftmost button for more
than 3 seconds. Each time an operation is
executed, the setting changes between On/Off.
(When the setting changes, “DP HPD Control
: On” / “DP HPD Control : Off” is displayed on
screen.)