●
Rear
17
16
13
14
12
11
10
9
8
7
6
15
18
19
20
6. Handle
This handle is used for transportation.
7. Security lock slot
Complies with Kensington’s MicroSaver security system.
8. Lock button
Use this button to remove the monitor from the stand.
9. Headphone jack
Connects to headphones.
10. USB-A connector
(downstream)
Connects to a peripheral USB device (
).
11. Cable cover
Holds the monitor cables.
12. Stand
*1
Adjusts the height and angle (tilt and swivel) of the monitor.
13. Main power switch
Turns the main power on or off. : On, : Off
14. Power connector
Connects the power cord.
15. LAN port (RJ-45)
When using a network connection with the docking station function (
this connects to a modem or router with a LAN cable.
16. HDMI connector
Connects to a PC with HDMI output.
17. DisplayPort
connector
Connects to a PC with DisplayPort output.
18. USB-B connector
(upstream)
Connect the USB cable when using software that requires USB connection or when
using the docking station function (
).
19. USB-C connector
(upstream)
Connects to a PC with USB-C output. This also transmits the USB signal that is
necessary for using software that requires USB connection or when using the
docking station function (
).
20. USB-C connector
(downstream)
When connecting in a daisy chain connection, this connects to the USB-C
upstream connectors of the other monitors in the configuration. It can also be used
to connect to peripherals that support USB (
*1 An optional arm (or optional stand) can be attached by removing the stand section.
10
Chapter 1 Introduction
