- 36 -
Chapter 4 Administrator Settings
Function
Setting Range
Description
Note
USB Power Save
On
Off
This product can disable USB communication with a PC when
the monitor enters power saving mode or when the monitor is
turned off. Disabling USB communication can reduce power
consumption in power saving mode and when the monitor is
turned off.
When this function is set to “Off”, USB connections can be left
enabled even when the monitor enters power saving mode or
when the monitor is turned off.
•
When this function is set to “On”, make sure to
complete any communication between connected
USB devices and the PC before turning off the
monitor. If storage devices, such as a USB flash
drive, are connected, turning off the monitor before
completing communication may result in data loss
or damage to storage devices.
•
When this function is set to “On”, the monitor
cannot be controlled using software, such as
“ScreenManager Pro”, when the monitor is in
power saving mode or when the monitor is turned
off.
•
When this function is set to “Off”, power
consumption is higher in power saving mode and
when the monitor is turned off.
On-Screen Logo
On
Off
When the monitor is turned on, the EIZO logo appears on the
screen.
When this function is set to “Off”, the EIZO logo does not appear.
-
Key Lock
On
Off
In order to prevent changes to settings, the operation switches on
the front of the monitor can be locked.
•
The following operation is available even if the
switches are locked:
- Turning the monitor on or off with the Power
switch
Compatibility Mode
On
Off
Depending on the PC and graphics board, the input signal may
not be detected and the monitor may not recover from power
saving mode. If this happens, set this function to “On”.
-
