background image

SAFETY SYMBOLS 

This manual uses the safety symbols below.  They denote critical information.  Please read them 
carefully. 
 

 

WARNING 

Failure to abide by the information in a WARNING may result in serious injury and 
can be life threatening. 

 

CAUTION 

Failure to abide by the information in a CAUTION may result in moderate injury 
and/or property or product damage. 

 

 
Indicates a prohibited action. 

 

 
Indicates to ground for safety. 

 

Copyright© 2003-2004 EIZO NANAO CORPORATION.  All rights reserved.  No part of this 
manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any 
means, electronic, mechanical, or otherwise, without the prior written permission of EIZO 
NANAO CORPORATION. 
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or 
information confidential unless prior arrangements are made pursuant to EIZO NANAO 
CORPORATION's receipt of said information.  Although every effort has been made to ensure 
that this manual provides up-to-date information, please note that EIZO monitor specifications 
are subject to change without notice. 

 

ENERGY STAR is a U.S. registered mark. 
Apple and Macintosh are registered trademarks of Apple Computer, Inc. 
BSQUARE is a registered trademark of Microsoft Corporation. 
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards 
Association. 
JEM-CE is a trademark of BSQUARE Corporation. 
VGA is a registered trademark of International Business Machines Corporation. 
Windows is a registered trademark of Microsoft Corporation. 
ScreenManager and PowerManager are trademarks of EIZO NANAO CORPORATION. 
FlexScan and EIZO are registered trademarks of EIZO NANAO CORPORATION. 

 

 

As an ENERGY STAR

®

 Partner, EIZO NANAO CORPORATION has determined 

that this product meets the ENERGY STAR guidelines for energy efficiency. 

   

 

 

3

Summary of Contents for eClient 630LT-GR





































































Reviews: