WARNING
Use the correct voltage.
• The unit is designed for use with a specific voltage only. Connection to polarities and voltages
other than those specified on the monitor or in this User’s Manual may cause fire, electric
shock, or equipment damage.
• Do not overload your power circuit, as this may result in fire or electric shock.
Only supply power after setting up all power connections.
Connecting the product to a power source with power being supplied may cause electric shock.
If using the DC power terminal block, do not touch the terminal block while it is
electrified.
Touching the terminal block in this state may result in electric shock.
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
To remove the DC power terminal block, grasp the terminal block firmly and pull.
Tugging on the wiring may damage it and may result in fire or electric shock.
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or
electric shock.
Be careful when handling the removed stylus battery.
• Do not disassemble, heat, wet, or short circuit the battery.
• Follow regional laws and regulations when disposing of the battery.
• See the User’s Manual for how to remove the battery.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any
part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some
physical symptoms result, please consult your doctor.
Periodically check the tightening of screws.
If screws are loose, the monitor may detach and cause injury or equipment damage.
English
5
PRECAUTIONS
