12. USB upstream port
Connect a USB cable to this port to:
• Use the touch panel.
• Control the monitor via USB.
• Use USB hub function.
13. DisplayPort connector
Inputs DisplayPort signal of a PC.
14. HDMI connector
Inputs HDMI signal of a PC.
15. DVI (DVI-D) connector
Inputs DVI signal of a PC.
16. RS232C port
D-Sub 9-pin (female) connector
Use this connector to control the monitor with RS-232C
communication.
17. RS485 port
Use this connector to control the monitor with RS-485 communication.
18. DC power connector
Installs the DC power terminal block.
A DC power fuse is installed at factory shipment.
19. AC power connector
Connects the power cord.
The insulation cover is attached at factory shipment.
20. Functional earth terminal (FG)
A terminal for grounding (functional earth) designed for safe equipment
operation.
The tapped hole is M4 (4 mm nominal diameter), 6 mm depth.
21. AC main power switch
Turns the AC main power on or off.
| : On,○: Off
22. Cable tie holder
For attaching cable ties used to hold the cables.
English
11
Chapter 1 Introduction
