20
Chapter 2 Setup
2-3. Connected
Attention
• Do not move the drive unit of the camera with your hand. Be sure to use the CCU Control Panel or the remote
controller.
●
Connection Example
Camera cable
Camera
Monitor, etc.
HDMI cable, etc.
Power cord
CCU
●
Connecting the Camera with CCU
1.
Connect the camera and CCU using a provided camera cable.
Attention
• Use the provided camera cable.
• In case of any damage is found with the cable, do not use it.
• Disconnect the power cord.
• During the work, be sure to observe the following:
- Do not touch the connector pins.
- Do not touch pins at the end of any cable connected to a connector.
- Take anti-static precautions such as using an anti-static wrist wrap when working.
Camera
Camera cable
CCU
2.
Attach the cover to the rear side of the camera.
Summary of Contents for CuratOR SC430-PTR
Page 59: ...English 59...
