Eizo CuratOR EX3242, Installation Manual

Page: 12 / 26

12
Chapter 2 Advanced Adjustment / Setting
Function Setting Description
Advanced
Setting
Auto Input
Detection
*1
On / Off This function automatically recognizes the
connector through which computer signals
are input, and displays images on the screen
accordingly.
• “On”
When the monitor is connected to
multiple devices, if a specific device
enters power saving mode or no signals
are input to the monitor, the connector is
automatically changed to another one to
which signals are input.
• “Off”
Set to this when manually selecting input
signals. In this case, you can select
the input signal to display using the
control button on the bottom of the
monitor. For details, see “1-2. Switching
Input Signals” (page 5) .
Note
• When this function is set to “On”, the
monitor only enters the power saving mode
when signals are not input from any device.
Input
Skip
*1
DisplayPort - / Skip When “Auto Input Detection” is “On”, select
the port to skip signal detection.
Note
• If all of the ports are set to “Skip”, then
input signal will not be detected, in the
same way as when “Auto Input Detection”
is set to “Off”.
HDMI
SDI 1
SDI 2
DVI
On-Screen
Logo
On / Off Select whether to display or hide the logo
when the monitor starts.
SDI 1 Input
equalizer
On / Off Corrects the SDI 1 input signal
Note
• If noise is apparent when using the short
SDI cable, set this to “Off”.
RS-232C 19200 bps / 115200 bps Sets the communication speed when
controlling this product from an external device
connected using the RS-232C terminal.
Monitor Reset OK / Cancel Restores all settings to their default values.
*1 Disabled during dual screen display (PbyP or PinP).