Eizo CuratOR EX2721, Installation Manual

Page: 4 / 28

4
Chapter 1 Basic Adjustment / Setting
Chapter 1 Basic Adjustment / Setting
This chapter describes the basic functions that can be adjusted and set by pressing the buttons on the front
of the monitor.
1-1. Loading the Monitor Settings
It is possible to switch to PRESET, FACTORY, or the USER settings that have been set in advance.
PRESET Basic settings are made in advance at the factory. The settings of PRESET cannot be
changed.
FACTORY Returns to settings when shipped from the factory.
USER Various settings including menus can be made for personal use. For details, see “Preset”
(page 10) .
1.
Press (PRESET).
The preset menu is displayed.
2.
Press to select the PRESET number, FACTORY, or USER number to
load, and then press (ENTER).
The pre-made settings are loaded and the settings are changed. The selectable settings are as
follows.
• PRESET1 to PRESET5
• FACTORY
• USER1 to USER10
Note
• The “PRESET” menu will disappear after five seconds have elapsed if no operation is performed.
• is displayed for the USER number that has already been registered.
• When selecting a USER number that has not yet been registered, “No Data” is displayed.
• For information about the main default settings, see “4-1. Main Default Settings” (page 20) .