3.
Display “Color” in the Setting menu, and configure the settings required.
Note
•
It is recommended to perform “Reset” in “Color” before configuring the settings. If you perform “Reset”, no
additional configuration is required except for the SDR image with YUV signal.
Settings for each color mode and color format selected are shown below.
Color Mode
Input Color Format
Brightness (cd/m
2
)
Gamma (EOTF)
BT.2020
RGB
100
2.4
YUV
100
2.4
BT.709
RGB
100
2.4
YUV
100
2.4
DCI-P3
RGB
48
2.6
PQ_BT.2100
RGB
1000
PQ
YUV
1000
PQ
PQ_DCI-P3
RGB
1000
PQ
HLG_BT.2100
RGB
1000
HLG
YUV
1000
HLG
Settings for Advanced Settings are left default. For more information, see
.
4.
Close the Setting menu to complete settings.
Press the
(EXIT) button to exit “Color” and display the Setting menu. Press the (EXIT) button
again to exit the Setting menu.
54
Chapter 7 SDR/HDR Settings
