Eizo ColorEdge PROMINENCE CG3146, User Manual

Page: 53 / 70

2.
Display “Signal” in the Setting menu, and configure the settings required.
Note
• For more information about basic operation of the Setting menu, see “3-1. Basic Operation of the Setting
Menu” (page 15) .
1. If the image is not properly displayed, set “Input Color Format” in the “Signal” menu.
If the text including “YCbCr” or “YCC” is displayed in “Signal Information” in the “Signal” menu, the input
signal is YUV. If the text including “RGB” is displayed, the input signal is RGB.
2. If the YUV signal is displayed, “YUV Color Matrix” is set.
Settings for each color mode selected are shown below.
Color Mode YUV Color Matrix
BT.2020 BT.2020
BT.709 BT.709
PQ_BT.2100 BT.2020
HLG_BT.2100 BT.2020
Note
• If the input signal is RGB, use the default setting.
• A conversion constant other than BT.2020 may be applied due to restrictions or settings of your equipment
and tools. If it is the case, configure the settings properly for your equipment and tools.
3. Set “Input Range”.
Settings for each color mode and color format selected are shown below.
Color Mode Input Color Format Input Range
BT.2020 RGB Full
YUV Limited (109% White)
BT.709 RGB Full
YUV Limited (109% White)
DCI-P3 RGB Full
PQ_BT.2100 RGB Full
YUV Limited
PQ_DCI-P3 RGB Full
HLG_BT.2100 RGB Full
YUV Limited
53
Chapter 7 SDR/HDR Settings