12
HB4801/HB4802/HB4803/HB4804/HB5801/HB4801B/HB4802B/HB4803B/HB4804B/HB5801B
HB5801A/HB5802A/HB5801D/HB5802D/HB5801A1/HB5802A1/HB5801D1/HB5802D1
Any adjoining wall surface situated within 200mm from the edge of any hob burner must be a suitable non-
combustible material for a height of 150mm for the entire length of the hob. Any combustible construction above the
hotplate must be at least 600mm above the top of the pan supports no construction shall be within 450mm above the
top of the pan supports.
IMPORTANT!!
Under the hob it is necessary to always apply a panel of separation in wood, positioned to a least distance of 70 mm by
the bottom of the same, which has to easily be removable to allow possible operations of maintenance (see fig. 10).
The hob has a special seal which prevents liquid from infiltrating into the cabinet. Strictly comply with the following
instructions in order to correctly apply this seal:
-
Detach the seals from their backing, checking that the transparent protection still adheres to the seal itself.
-
Overturn the hob and correctly position seal (E) (fig. 11) under the edge of the hob itself, so that the outer part of
the seal itself perfectly matches the outer perimetral edge of the hob. The ends of the strips must fit together
without overlapping.
-
Evenly and securely fix the seal to the hob, pressing it in place with the fingers.
-
Remove the strip of protective paper from the seal. Insert the hooks into their relative housings (K) on the hob
and set this into the hole in the cabinet. Lock it in place with the relative fixing screws (V) (see fig. 12).
Summary of Contents for HB4801
Page 18: ...17...
