background image

19

CE 94 attachment for
manual

Gerd Eisenblätter GmbH 

Jeschkenstr. 12d 

|

 DE-82538 Geretsried 

|

 +49 8171 9082 - 010 

|

 Fax - 210 

www.eisenblaetter.de 

www.eisenblaetter.tools

 | 

[email protected]

Geretsried, 2016-02-08

Gerd Eisenblätter

ENGLISH

NEDERLANDS

DEUTSCH

DANSK

FRANÇAIS

NORGE

ITALIANO

PORTUGUES

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that the product described under 

“Technical Data” fulfi  lls all the relevant provisions of the directives 2011/65/EU 

(RoHs), 2004/108/EC (until 19 April 2016), 2014/30/EU (from 20 April 2016),

2006/42/EC and the following harmonized standards have been used: EN 

60745-1:2009+A11:2010, EN 60745-2-3:2011+A2:2013+A11:2014+A12:2014

+A13:2015, EN 55014-1:2006+A1:2009+A2:2011, EN 55014-2:1997+A1:2001

+A2:2008, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 50581:2012

EC - VERKLARING VAN OVEREENSTEMMING

Wij verklaren in uitsluitende verantwoording dat het onder ‚Technische gege-

vens‘ beschreven product overeenstemt met alle relevante voorschriften van 

de richtlijn 2011/65/EU (RoHs), 2004/108/EG (tot 19 April 2016), 2014/30/EU 

(vanaf 20 April 2016), 2006/42/EG en de volgende geharmoniseerde norma-

tieve documenten: EN 60745-1:2009+A11:2010, EN 60745-2-3:2011+A2:201

3+A11:2014+A12:2014+A13:2015, EN 55014-1:2006+A1:2009+A2:2011, EN 

55014-2:1997+A1:2001+A2:2008, EN 61000-3-2:2014, EN 61000-3-3:2013, 

EN 50581:2012

CE-KONFORMITÄTSERKLÄRUNG

Wir erklären in alleiniger Verantwortung, dass das unter „Technische Daten“ 

beschriebene Produkt mit alle relevanten Vorschriften der Richtline 2011/65/

EU (RoHs), 2004/108/EG (bis 19. April 2016), 2014/30/EU (ab 20. April 2016), 

2006/42/EG und den folgenden harmonisierten normativen Dokumenten 

übereinstimmt: EN 60745-1:2009+A11:2010, EN 60745-2-3:2011+A2:2013

+A11:2014+A12:2014+A13:2015, EN 55014-1:2006+A1:2009+A2:2011, EN 

55014-2:1997+A1:2001+A2:2008, EN 61000-3-2:2014, EN 61000-3-3:2013

EN 50581:2012

CE-KONFORMITETSERKLÆRING

Vi erklærer som eneansvarlig, at det under „Tekniske data“ beskrevne produkt 

stemmer overens med alle relevante forskrifter, der følger af direktiv 2011/65/

EU (RoHs), 2004/108/EF (indtil 19 April 2016), 2014/30/EU (fra 20 April 2016), 

2006/42/EF samt af følgende harmoniserede normative dokumenter: 

EN 60745-1:2009+A11:2010, EN 60745-2-3:2011+A2:2013+A11:20

14+A12:2014+A13:2015, EN 55014-1:2006+A1:2009+A2:2011, EN 

55014-2:1997+A1:2001+A2:2008, EN 61000-3-2:2014, EN 61000-3-3:2013,

EN 50581:2012

DECLARATION CE DE CONFORMITÉ

Nous déclarons sous notre propre responsabilité que le produit décrit aux 

„Données techniques“ est conforme à toutes les dispositions des directives 

2011/65/EU (RoHs), 2004/108/CE (jusqu’au 19 April 2016), 2014/30/UE (à 

partir du 20 April 2016), 2006/42/CE et des documents normatifs harmo-

nisés suivants: EN 60745-1:2009+A11:2010, EN 60745-2-3:2011+A2:2013

+A11:2014+A12:2014+A13:2015, EN 55014-1:2006+A1:2009+A2:2011, EN 

55014-2:1997+A1:2001+A2:2008, EN 61000-3-2:2014, EN 61000-3-3:2013

EN 50581:2012

CE-SAMSVARSERKLÆRING

Vi erklærer i alene ansvar at produktet beskrevet i „Teknisk data“ over-

ensstemmer med alle relevante forskrifter til Eu direktiv 2011/65/

EU (RoHs), 2004/108/EC (til April 19, 2016), 2014/30/EU (fra 20 April 

2016), 2006/42/EF og de følgende harmoniserte normative dokumen-

tene. EN 60745-1:2009+A11:2010, EN 60745-2-3:2011+A2:2013+A11

:2014+A12:2014+A13:2015, EN 55014-1:2006+A1:2009+A2:2011, EN 

55014-2:1997+A1:2001+A2:2008, EN 61000-3-2:2014, EN 61000-3-3:2013

EN 50581:2012

DICHARAZIONE DI CONFORMITÀ CE

Dichiariamo sotto la nostra esclusiva responsabilità che il prodotto de-

scritto ai „Dati tecnici“ corrisponde a tutte le disposizioni delle direttive 

2011/65/EU (RoHs), 2004/108/CE (fi  no a 19 Aprile 2016), 2014/30/UE (fi  

no a 20 Aprile 2016), 2006/42/CE e successivi documenti normativi ar-

monizzati: EN 60745-1:2009+A11:2010, EN 60745-2-3:2011+A2:2013+A

11:2014+A12:2014+A13:2015, EN 55014-1:2006+A1:2009+A2:2011, EN 

55014-2:1997+A1:2001+A2:2008, EN 61000-3-2:2014, EN 61000-3-3:2013

EN 50581:2012

DECLARAÇÃO DE CONFORMIDADE CE

Declaramos sob responsabilidade exclusiva, que o produto descrito sob 

„Dados técnicos“ corresponde com todas as disposições relevantes da 

diretiva 2011/65/EU (RoHs), 2004/108/CE (até 19 April 2016), 2014/30/UE 

(desde 20 April 2016), 2006/42/CE e dos seguintes documentos normativos 

harmonizados. EN 60745-1:2009+A11:2010, EN 60745-2-3:2011+A2:2013

+A11:2014+A12:2014+A13:2015, EN 55014-1:2006+A1:2009+A2:2011, EN 

55014-2:1997+A1:2001+A2:2008, EN 61000-3-2:2014, EN 61000-3-3:2013

EN 50581:2012

§ 1 Scope of use

(1) These general conditions of sale of Gerd Eisenblätter GmbH, Jeschkenstrasse 12d,

82538 Geretsried, Germany (hereinafter EISENBLÄTTER GmbH) apply exclusively. Devia-

ting or conflicting terms are not recognized by EISENBLÄTTER GmbH unless the latter has

expressly accepted them.

(2) Unless otherwise specified in particular contexts, these general conditions of sale 

apply to all customers, regardless of whether they are entrepreneurs (§ 14 BGB (German 

Civil Code)), legal persons under public law or a special fund under public law as defined 

in § 310 para. 1 BGB or consumers (§ 13 BGB).

(3) If the client is an entrepreneur, these general conditions of sale also apply to all future

business transactions between EISENBLÄTTER GmbH and the customer. These general

terms and conditions also apply if EISENBLÄTTER GmbH delivers the goods in awareness

of deviating or conflicting terms.

§ 2 Conclusion of the contract

(1) Provided that the order constitutes an offer as defined in § 145 BGB, EISENBLÄTTER

GmbH is able to accept it within a week in case of mail orders or within a term of three 

business days in other cases.

(2) Orders and order acceptance shall be in text form; an exception to this rule applies for

transactions initiated via the online store (see Section B), which do not require text form.

(3) EISENBLÄTTER GmbH reserves ownership and copyrights to the Illustrations, drawings,

calculations and other documents belonging to them. This also applies to written docu-

ments designated as ”confidential”, which must not be passed on to third parties by the 

customer without prior express written approval.

§ 3 Payment terms

(1) Prices quoted by EISENBLÄTTER GmbH do not include packaging and shipping costs,

unless otherwise expressly agreed upon. Further, prices as quoted to entrepreneurs are to

be understood as not including value added tax, whereas prices as quoted to customers 

are to be understood as including value added tax. For customer orders, prices as quoted 

on the website of the online store (see Section B) include a value added tax of 19 %.

(2) The purchase price becomes payable upon conclusion of the contract. EISENBLÄTTER

GmbH reserves the right to offer payment on invoice to regular customers. In this case, 

the purchase price is due 14 days after billing. If the client is an entrepreneur, a late 

payment interest at a rate of 9 % above the respective base rate p.a. will be charged after 

the due date. Claims for further damages caused by the delay remain unaffected.

 

§ 4 Set-off, retention

The buyer shall be entitled to offset only to the extent that his counterclaims stem from 

the same contractual relationship or are recognized, undisputed, or final and absolute 

under court decision. Any claims for retention rights by the buyer may be based only on 

counterclaims stemming from the same contractual relationship.

§ 5 Delivery, passing of risk

(1) Delivery requires a timely and orderly performance of the obligations by the buyer. The

defense of unperformed contract remains reserved.

(2) When shipping the goods per the buyer’s request, the risk of accidental destruction 

and accidental deterioration of the goods is transferred to the buyer at the time of 

dispatch. This does not apply if the customer is a consumer. In this case the risk is passed 

on to the consumer upon delivery of the goods.

(3) In case of default in acceptance or another culpable violation of duties to cooperate 

by the buyer, EISENBLÄTTER GmbH is entitled to compensation for the resulting damage,

including any additional expenses. Any further claims remain reserved. The risk of acci-

dental destruction or damage to the goods is in this case transferred to the buyer upon 

default in acceptance.

§ 6 Retention of title

(1) If the buyer is a consumer, the goods remain the property of EISENBLÄTTER GmbH

until all payments from the sales contract have been fully received by EISENBLÄTTER

GmbH. If the buyer is an entrepreneur, the goods remain the property of EISENBLÄTTER

GmbH until all payments from the business relationship have been fully received by

EISENBLÄTTER GmbH. If the buyer has breached the contract, including payment default,

EISENBLÄTTER GmbH has the right to take back the goods.

(2) The buyer shall be obliged to handle the goods carefully, insure them appropriately 

and maintain them as necessary.

(3) To the extent that the purchase price has not been fully paid, the buyer shall be 

obliged to give immediate written notice to EISENBLÄTTER GmbH if the goods are encum-

bered with the rights of third parties or otherwise become subject to intervention by third 

parties.

(4) The buyer, if he is an entrepreneur, is in the ordinary course of business entitled to 

further sale of goods which are subject to retention of title. In this case, however, he 

assigns, at this point, to EISENBLÄTTER GmbH all claims from such further sale, regardless 

of whether it occurred prior to or after possible processing of the goods delivered under 

retention of title. Regardless of the power of EISENBLÄTTER GmbH to collect the respective 

claim, the buyer

still has the right to collect the claim after assignment. In this regard, EISENBLÄTTER

GmbH is obligated not to collect the claim, if and as far as the buyer fulfills his payment 

obligations, no filing for bankruptcy or similar proceedings has been made and the buyer 

has not ceased payments.

(5) EISENBLÄTTER GmbH accepts the above assignments.

(6) To the extent that the above securities exceed the claims to be secured by more than

10 %, EISENBLÄTTER GmbH is obligated to release the securities according to the selecti-

on made by EISENBLÄTTER GmbH at the request of the buyer.

§ 7 Warranty

(1) If the customer is an entrepreneur or merchant, the following warranty regulations 

apply:

(a) The goods are to be immediately examined for quality and quantity deviations, and 

obvious defects shall be reported to EISENBLÄTTER GmbH within two weeks after receipt 

of the goods; otherwise the assertion of warranty claims is excluded. Timely return of the 

product or a timely communication shall suffice to comply with the time limit. If the buyer 

is a merchant, an additional precondition for any warranty claim is the buyer‘s complian-

ce with his obligation of inspection, notification and rejection in accordance with § 377 

HGB (German Commercial Code).

(b) Warranty claims can be asserted within 12 months after the transfer of risk.

(c) If the goods are defective, the buyer has a right to cure by rectification of the defects 

or to delivery of defect-free goods. If the cure fails, the buyer is entitled to reduce the 

purchase price or revoke the contract.

(2) If the client is a consumer, the warranty claims are governed by §§ 434 et seq. BG

§ 8 Liability

(1) Where the client claims damages based on intent or gross negligence, including in-

tent or gross negligence by its representatives or persons used to perform its obligations,

EISENBLÄTTER GmbH is liable in accordance with the statutory provisions. In minor cases

of negligent breach of duty, liability is limited to the foreseeable, typical contractual, direct

average damages depending on the type of goods. This also applies to minor cases of 

negligent breach of duty by the legal representatives or persons used to perform obliga-

tions on behalf of EISENBLÄTTER GmbH.

(2) EISENBLÄTTER GmbH is not liable for minor cases of negligent breach of inessential

contractual obligations. EISENBLÄTTER GmbH is however liable for violations of essential

contractual legal positions of the customer. Essential contractual legal positions are those

which the contract must provide to the client according to the contractual content and 

purpose. EISENBLÄTTER GmbH is also liable for the breach of obligations whose fulfillment 

is a prerequisite for enabling proper execution of the contract and on whose compliance 

the purchaser can rely.

(3) The above liability restrictions shall not apply to claims by the client stemming from 

guarantee and/or product liability, nor in cases of bad faith, breach of essential contrac-

tual obligations or body and health damages or the loss of the customer‘s life which are 

ascribable to EISENBLÄTTER GmbH.

(4) Unless otherwise stipulated above, liability is excluded.

§ 9 Place of jurisdiction and applicable law

(1) This contract is governed by the laws of Germany (excluding the UN sales law). If 

the contract partner is a consumer, applicable statutory provisions of the country of 

residence or origin of the contract partner for consumer protection remain unaffected.

(2) If the customer is a merchant, the place of jurisdiction is the registered office of

EISENBLÄTTER GmbH; EISENBLÄTTER GmbH is however also entitled to suing the custo-

mer at the court of his place of residence.

(3) If the customer is a merchant, the place of delivery is the registered office of

EISENBLÄTTER GmbH.

§ 10 final provisions

If, for any reasons, any of the aforesaid terms are not applicable, this will not affect the 

validity of the remaining terms.

Stand: 10/2016

General Terms and Conditions

We reserve the right to make any changes we deem necessary.

Summary of Contents for POLY-PTX 802 HT





















Reviews: