GuaRdboX
-
Gd
series
IOM
(
Installation, Operation & Maintenance Manual) 0100-ENG
rev.5
8
Eisenbau s.r.l. a socio unico
Via T.A:Edison, 16 20090 Cusago (MI) Italy
Phone : +390293562116 Fax: +390293567735
Guardbox production unit : Via XXIV Maggio, 13
25017 – Sedena di Lonato (BS)
Phone : +390309131240 Fax: +390309130946
www.eisenbau.it
www.guardbox-ex.com
9.
indicator setting:
9.1
The 3D indicator (2) is visible on all 4 sides and is fully
adjustable on 360° without disassembly.
9.2
Loosen indicator M5 captive screws and rotate transparent
indicator dome (1) to desired viewing angle according to
valve position. (OPEN or CLOSED appearing through
indicator window).
9.3
Retighten the four captive M5 screws (3) using a torque of
max
3,5Nm
for standard plastic dome while, for glass dome
version, do not exceed the max torque of
0,5Nm.
10.
Storage and maintenance:
10.1
Store the boxes away from UV rays and atmospheric agents, in an environment with temperature between 0°C and 40°C.
10.2
The Guardbox devices require no servicing during normal working life if properly installed, except the normal inspection of
mounting screws/bolts, O-rings and terminal wiring for signs of loosening or corrosion as part of the routine plant maintenance.
10.3
Guardbox boxes have been projected to withstand the most severe mechanical fatigue test (more than 1000000 cycles) and
accelerated corrosion test (up to 500 hours according to UNI EN ISO9227). However for long-time outdoor usage expecially in
aggressive environments or if subjected to an elevate number of operations, is recommended to periodically check the correct
functionality and integrity of the box. If some parts are damaged, please contact the manufacturer or the local distributor for
certified replacement parts.
10.4
Maintenance should be carried out by suitably trained personnel to an applicable Code of Practice (eg. IEC/EN60079-14 &
IEC/EN61241-14).
10.5
Ensure safety warnings
are observed during maintenance.
10.6
Eisenbau reserves the right to change or modify products without prior notice or without incurring any obligation to make some
changes on products previously or subsequently sold.
10.7
All trademarks are property of their respective owners.
11.
warranty:
For warranty conditions, please refers to section 7 of document
“General terms and condition of sale”.
3,5Nm
standard plastic
dome
optional glass
dome
0,5Nm
