FM074342
2015-10-09·BA00·III·en·04
Technical data
7
Portable Lamp
HSE 7 LED / LS 7 LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency light
duration
Deep discharge
protection
At a residual capacity of the battery of < 10 %, the main light is automatically
switched to the secondary light.
Test function
Lamp control
When the main light is defective, the light is switched automatically to the
secondary light
Battery capacity
Determination of the current battery capacity
Mechanical data
Degree of protection IP66 (IEC/EN 60529)
Enclosure material
Polyamide, impact-strength
Head tilting
toward the front: 100°, toward the back: 90°
Pushbutton
main light ON - secondary light ON - main light FLASHING OFF
Charge state display The LEDs indicate the available capacity for approx. 5 seconds
Ambient conditions
Ambient temperature -20 ... +50 °C
Storage temperature -20 ... +50 °C
Charging unit
Version
charging unit LS 7 LED (for explosion-protected portable lamps)
supply voltage: 110 ... 240 V AC, 50 / 60 Hz and 12 ... 30 V DC
with emergency lighting function and automatic break device for motor vehicle
operation
with power supply cable for 110 ... 240 V AC, 50 / 60 Hz
Optionally, a charging cable for motor vehicle operation for 12 ... 30 V DC is
available.
Charging current
Charging time
approx. 11 h
Function
Charging starts upon inserting the portable lamp into the charging unit - with
voltage display via green LED
Automatic break
device
In motor vehicle operation, the car battery voltage is monitored. If the voltage
of the car battery drops below 11.7 V and 23.5 V with a 12 V and 24 V battery,
respectively, the charging process of the portable lamp will be interrupted
automatically.
The automatic break device can be deactivated.
Protection class
II (with protective insulation)
Technical Data
main light:
continuous duty:
flashing mode:
continuously on, typical 7 h
flashing up to 18 h
secondary
light:
continuous duty: continuously on, typical 32 h
at room temperature:
charging process
stand by
12 V DC
24 V DC
110 V AC
240 V AC
max. 170 mA
max. 120 mA
max. 90 mA
max. 60 mA
power consumption < 1 W
