FM074342
2015-10-09·BA00·III·en·04
Operation
15
Portable Lamp
HSE 7 LED / LS 7 LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
9.3
Charging Operation
9.3.1 Battery charging
Charging unit
• Connect to the supply voltage.
• The "Power" LED is lit.
• Insert the portable lamp.
Portable lamp
• Any switched-on LED will be switched off.
• A functional test will be carried out.
• The LED display shows information on the charging state or possible faults.
Upon removal from the charging unit and with the emergency lighting function
switched on
• The LED main light will be switched on.
Upon removal from the charging unit and with the emergency lighting function
switched off
• The function before insertion will be activated.
9.3.2 Charging switch-off when used in a motor vehicle.
Activating and deactivating
• Switch on the secondary light.
• Press button again and keep it pressed.
• With the button depressed, insert the portable lamp into the charging unit and keep
pressing the button until the LED signals the switchover.
red
green green green green Description
Emergency lighting function off
Emergency lighting function on
WARNING
Danger when used in hazardous areas!
The explosion protection is impaired!
• Use the charging unit in safe areas only.
At room temperature, the charging time of a discharged battery is
approx. 11 hours.
The portable lamp can remain in the charging unit even when the battery is
completely charged.
Upon delivery, the function "Switch off charging operation in the event of
undervoltage" is active.
In case of undervoltage, the charging operation in the motor vehicle will be
interrupted.
The function can be deactivated and activated.
red
green green green green Description
Charging switch-off off
Charging switch-off on