3.
In case of DC (0 to + 20V) O/P voltage, GREEN LED indicates that the supply
is in the normal condition & when the GREEN LED changes to the RED, it means
that supply is overloaded. In that case reduce the load Connected at the DC
Output Sockets, so that the LED changes from RED to GREEN.
Cleaning Instruction :
For cleaning the unit / Power Supply outwardly only use the damped moist cloth soaked
with clear water.
Intended Use of Equipment :
Mostly this equipment will be used in Educational Institutions, Schools for carrying out
the experiments.
Environmental Conditions :
1.
Pollution Degree: 2
2.
Installation Category: 2
3.
Altitude: 2000 meters Max.
4.
Maximum recommended humidity: 75% RH.
5.
Electrical Supply: 120V/240V, ± 10%, 50/60Hz
6.
Equipment is meant for Indoor use only.
7.
Ambient Temperature: 30°C Max.
Equipment Installation :
Equipment to be installed by qualified trained personnel only.
Explanation of Symbols :
Caution, Refer Instruction Manual.
Danger High Voltage Present.
Protective Earth.
Important :
Protection impairment if used in a manner not specified as per this manual.
MUST "DISCONNECT THE SUPPLY BEFORE SERVICING".
-3-
!
!!!!!!!!!
EISCO SCIENTIFIC instructions, content and design is intellectual property of EISCO
U.S. Distributor :
Eisco Scientific
850 St Paul St, Suite 15, Rochester, NY 14605
Website : www.eiscolabs.com
Manufactured by :
www.eiscolabs.com
No operator serviceable parts inside. Refer to qualified personnel for servicing repairs only.
