PIK-20 E Service manual
'X
1.2. Wing assembly (Figure 2)
— Insert the right-hand wing ensuring that the wing bevel pins (1) and
(2) are in the seats (4) and (5) in the fuselage.
— Insert the left-hand wing in the same way and watch that the bevel
pins (6) and (7) go correctly into their seats. Draw the wings together
with the wing assembly tool and install the main wing pin and secure
it using a Fokker-pin. It is necessary to lift the wing tips when using
the assembly tool.
— Connect the flap and airbrake control rods with quick release locks
and secure them with Fokker pins.
— Connect the water ballast hoses to the fuselage.
— Install the venturi tube.
1.3. Tailplane assembly (Fig 3)
EIRI KY------------------------
Kisällinkatu 8
SF-15170 Lahti 17
page II-3
