PIK-20 E Service manual
A
4.2.2 Inspection guide lines
a) MOVABLE PARTS for lubrication, servicing, security of attachment,
binding, exessive wear, safetying, proper operation, proper adjust
ment, correct travel, cracked fittings, security of hinges, defective
bearings, cleanliness, corrosion, deformation, sealing and tension.
b) FLUID LINES AND HOSES for: leaks, cracks, dents, kinks, chafing,
proper radius, security, corrosion, deterioration, obstruction and fo
reign matter.
c) METAL PARTS for: security of attachment, cracks, metal distortion,
broken spotwelds, corrosion, condition of paint and any other appa
rent damage.
d) WIRING for: security, chafing, burning, defective insulation, loose
or broken terminals, heat deterioration and corroded terminals.
e) BOLTS IN CRITICAL AREAS for: correct torque in accordance with
torque values given in 4.2.5, when installed or when visual inspection
indicates the need for a torque check.
EIRI KY
Kisällinkatu 8
SF-15170 Lahti 17
page II 14