background image

9

① 

Plug the AC adaptor into the power outlet.

② 

Place the Einstein Lumica onto the charging stand. 

(The operation LED lights up to indicate it is charging*.)

③ 

It takes approximately 2 hours to complete the charge. 

(The operation LED lights up faintly.)

*If the battery has enough charge, the operation LED does not light up

.

The unit may not be fully charged when it is shipped. Please charge the unit 
completely prior to use.

When the battery is running low, the low battery icon appears on the display and 
the operation LED on the unit starts flashing. In this case, the camera will shut off 
within 1 minute, so place the camera into the charging stand immediately.

Charging Stand

Operation LED

(It lights up if the unit is on the charging stand.)

Power Outlet

RECHARGING

• Do not bend a cable by force or put a heavy staff on a cable, to avoid a break.
• Do not use a damaged cable. It may cause a system failure.
• Do not touch a power plug, DC jack, or power cable with wet hands. It may cause an electric shock.

If the camera is charged for a long period of time, make sure to shut off the camera before placing it 
into the charging stand.

When the camera is in the sleep mode, it repeats discharge and recharge of the power on the battery. 
If the camera resumes from the sleep mode while it is discharging, the battery level indicator may not 
be displayed in full, but it is not a failure of the unit. Turn off the camera and charge the battery 
completely to avoid the low charge.

AC Adaptor

Remaining Battery Level

* The operation LED lights up brightly 

while charging, and faintly when the 
charging is completed.

10

TRANSFERRING IMAGES WIRELESSLY

To use with hard disc recorders or computers, it is recommended to use RF receivers.

Viewing on a TV

Connect our wireless video microwave receiver Morse typeS into any device equipped with a 
video input; TV, video printer, etc., to view images.

To a video input

Camera

Morse

TV

Importing into a Computer

Connect our wireless USB interface Morse typeS into the USB port on your computer to view 
images.

Viewing on a Charside Monitor

The images can e transmitted onto our TFT monitor (Doctor’s Station, etc.) wirelessly.

Camera

USB-Morse

PC

Camera

Doctor's Station

wireless

wireless

wireless

13ch

13ch

Summary of Contents for LUMICA

















Reviews: