3
Turning On
Avoid to use the product more than 10 minutes. The product will not be damaged, but it
may cause the product to have a heat (about or higher than 40
℃
(105
F
)) and may cause a
low level of burn injury when the product is continuously in operation.
Operating Time
Slide the power switch to the left (up).
The LEDs flash and the power is on.
BASIC OPERATION
Turning Off
Slide the power switch to the right (down).
The white LEDs shut off and the power turns off.
ON!
LEDs turn on.
LEDs turn off
LEDs turn off
OFF!
Attaching Lens Protection Sheet
Attaching Disposable Covers
Make sure to attach a disposable cover prior to
use (refer to another instruction to see how to
attach the cover).
*Use a new cover each time.
Make sure to attach a lens protective sheet prior to use
(refer to another instruction to see how to attach the sheet).
This sheet is to avoid any dust to contact the lens.
*It does not require to be replaced every time. Replace the sheet when
the image becomes blurry. (Recommended term: Once a month)
■
It may cause a blurry image
due to a dust or fogged lens
when used without attaching a
lens protective sheet and/or a
disposable cover.
■
Do not reuse the used
disposable cover. Make sure
to use a new cover each time.
■
Dispose the used disposable
covers or lens protective
sheets, following by
regulations or legislations in
your area.
The captured images saved on its on-board memory are deleted in 10 sec. after turning off the
power. The images remain on its on-board memory when turning on the power within the 10 sec.
