EINHELL BT-FW 100 Original Operating Instructions Download Page 16

t

For EU countries only

Never place any electric tools in your household refuse.

To comply with European Directive 2002/96/EC concerning old electric and electronic equipment and its 
implementation in national laws, old electric tools have to be separated from other waste and disposed of 
in an environment-friendly fashion, e.g. by taking to a recycling depot.

Recycling alternative to the demand to return electrical devices:
As an alternative to returning the electrical device, the owner is obliged to cooperate in ensuring that the 
device is properly recycled if ownership is relinquished. This can also be done by handing over the used 
device to a returns center, which will dispose of it in accordance with national commercial and industrial 
waste management legislation. This does not apply to the accessories and auxiliary equipment without 
any electrical components which are included with the used device.

16

t

Given unfavorable conditions in the power supply the equipment may cause the voltage to drop temporarily. If the supply
impedance “Z” at the connection point to the public power supply exceeds 0,448 Ω it may be necessary to take further measures
before the equipment can be used as intended from this power supply. If necessary, you can ask your local electricity supply
company for the impedance value.

Anleitung_BT_FW_100_GB_SPK7__  13.03.13  13:12  Seite 16

Summary of Contents for BT-FW 100





















Reviews: