GB
11
processed before, watch out for foreign bodies
such as nails or screws etc.
Before you actuate the On/Off switch, make sure
that the saw blade is correctly fitted and that the
machine’s moving parts run smoothly.
Use clamps or a vise to hold the workpiece
securely. This is safer than using your hand.
Follow the instructions for lubrication and
changing tools.
Keep handles dry, clean and free from oil and
grease.
Keep the push stick or handle for a push block at
the machine at all times, even when you are not
using them.
Do not cut rebates or grooves without fitting a
suitable guard, e.g. a tunnel-type guard, over the
saw table.
Use only the transport device for transporting the
machine.
While you are moving the machine it is best to
cover the top part of the blade, for example using
a guard.
Do not lose these safety instructions.
Si_Hi_Tischkreissaege_D_GB_F_NL_SPK7:_ 08.07.2010 11:07 Uhr Seite 11
