EN
- 12 -
7. Cleaning, maintenance and
ordering spare parts
HAZARD!
Always pull out the battery pack before starting
any cleaning work.
7.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible.
•
We recommend cleaning the equipment
immediately each time after use.
7.2 Cleaning the
fi
lter (Fig. 1/Item 3)
Clean the equipment regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the
plastic parts in the equipment.
7.3 Cleaning the tank (Fig. 1/Item 7)
The tank can be cleaned with a damp cloth
and some soft soap or under running water,
depending on the amount of dirt.
7.4 Cleaning the
fi
lters
Cleaning the pleated
fi
lter (Fig. 2)
Clean the pleated
fi
lter (18) regularly by carefully
patting it and cleaning it with a
fi
ne brush or hand
brush.
Cleaning the foam
fi
lter (Fig. 2)
Clean the foam
fi
lter (15) with a little soft soap
under running water and allow it to air-dry.
Cleaning the
fi
lter (Figs. 19/20)
The
fi
lter (33) should be checked at regular
intervals and cleaned if necessary.
1. Remove
the
fi
lter cover (34) (Fig. 19).
2. Take out the
fi
lter (33) (Fig. 20)
3. Clean
the
fi
lter by tapping it or blowing it out.
4. Assemble in reverse order
7.5 Maintenance
At regular intervals and before each use, check
that the
fi
lters in the wet/dry vacuum are securely
fi
tted.
7.6 Ordering replacement parts:
Service
1.
If your power tool requires service,
contact an authorized Einhell USA dealer
or call the Einhell USA customer service
center at 1-866-EINHELL
(1-866-346-4355).
Only identical
replacement parts should be utilized for
repairs. This will ensure that the safety of the
power tool is maintained.
2.
If the battery charger cable is damaged, it
must be immediately replaced to avoid a
hazard.
Contact the Einhell USA
®
customer
service center at 1-866-EINHELL
(1-866-346-4355) for assistance.
8. Disposal and recycling
The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council o
ffi
ces.
9. Storage
Store the equipment and its accessories out
of children‘s reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 41°F and 86°F
(5°C and 30°C). Keep the electric tool in its
original packaging.
The reprinting or reproduction by any other
means, in whole or in part, of documentation and
papers accompanying the products is strictly
subject to the express consent of iSC GmbH.
Subject to technical changes
Anl_TE_VC_36_30_Li_S_USA_SPK7.indb 12
Anl_TE_VC_36_30_Li_S_USA_SPK7.indb 12
08.05.2019 10:28:16
08.05.2019 10:28:16
