9
GB
Keep these instructions for future reference.
Table of contents
1. Warnings
2. Device
description
3. Technical
data
4. Supplied
package
5. Assembly
6. Safety
information
7. Connect to the gas cylinder
8. Replace the gas cylinder
9. Starting
up
10. Shutting down
11. Storage / Care / Repair
12. Troubleshooting
1. Warnings
The party radiator is for outdoor use only.
Do not move the party radiator when it is in use.
Close the valve on the gas cylinder after use.
Some parts of the party radiator may become
very hot, keep children away from it.
Important. Do not make any technical
modifications to the party radiator as they may be
dangerous.
Important. Never use white spirit, petrol or similar
liquids to ignite or reignite the unit.
Read these instructions carefully before
installation and use
2. Description
The party heater is used outdoors to heat nearby
areas. A burner inside the perforated plate body
produces the necessary heat, which is radiated to the
immediate surroundings by an aluminium reflector as
well as by the perforated plate itself.
The party heater has to be set up on a level,
incombustible surface with no - or only a very slight -
gradient. Its center of gravity can be lowered
considerably by filling sand in the foot.
To make it easier to change the gas bottle, the body
can be raised and locked in place on the appliance
itself.
The party heater is designed to work only with
propane-butane (liquefied gas). It is connected
directly to the gas bottle by means of a DVGW-tested
and approved hose pipe and a liquefied gas regulator
(outlet pressure 28-30/37 mbar, capacity 1,5 kg/h).
The following regulations have to
be observed and adhered to when making the
connection:
Technical regulations concerning liquefied gas
(e.g. TRF)
Guidelines published by liability insurance
associations concerning the use of liquefied gas
in special applications
3. Technical data
Total height
2250 mm
Approx. reflector diameter
790 mm
Max. heat rating
13 kW (Hs)
Approx. connection rating
0.946 kg/h
Connection pressure
28-30/37 mbar
Countries of destination
BE/CH/ES/FR/GB/GR/IE/IT/PT
Type of gas
Liquid gas (propane/butane)
Gas category
I3+
Gas cylinder
Camping 5 – 11 kg
Burner element
Infinitely adjustable
Ignition Piezo
ignition
The content of an 11 kg gas cylinder is sufficient for
running the burner at full capacity for approx. 11
hours.
4. Items supplied
Item 1
Reflector
1
Item 2
Burner assembly
1
Item 4
Column
1
Item 5
Washer
1
Item 6
Case with cover
1
Item 7
Case holder
3
Item 8
Foot
1
Item 9
Foot console
1
Item 10 Pan head screw M6x12
3
Item 11 N/A
Item 12 Hex screw M6x12 mm, galvanized
6
Item 13 Hex screw M6x12 mm, stainless steel
6
Item 14 N/A
Item 15 Hex nut M6, galvanized
6
Item 16 Hex nut M6, stainless steel
3
Item 17 N/A
Anleitung PS 13 Niro_SPK7 06.06.2006 14:03 Uhr Seite 9
