10
Ordering spare parts
Please provide the following information on all orders
for spare parts:
앬
Model/type of tool
앬
Article number of the tool
앬
ID number of the tool
앬
Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
GB
Problem
Possible cause
Solution
1. The electric tool will not work
despite the battery pack being in
place.
1. The battery pack is not fitted
correctly
2. The battery pack is not charged
or defective.
1. Check that the battery pack is
fully fitted in the tool and is held
securely by the fixing attachments.
2. Charge the battery pack. If the
electric tool still fails to work after
you have charged the battery,
have the battery pack and tool
checked by a specialist workshop.
2. The red charging control light is
not lit when the battery pack is
fitted.
1. The mains plug for the charger
is not connected to the supply.
2. The charger’s mains cable is
defective.
3. The battery pack is fully
charged.
1. Connect the plug to the socket.
2. Have the cable repaired by a
specialist workshop.
3. Remove the battery pack.
3. The electric tool works but the
drill bit or screwdriver bit does not
turn.
The drill or screwdriver bit is loose
Tighten the chuck.
4. The electric tool works and the
drill or screwdriver bit turns but it
does not produce a hole or does
not tighten the screw.
The electric tool is set to turn
counter-clockwise.
Switch the direction to clockwise.
5. As you are drilling or tighten the
screw, the electric tool suddenly
cuts out.
1. The battery pack is discharged.
2. The screw is fully tightened or
blocked.
3. The drill bit is blocked.
1. See problem 1.
2. Switch off the electric tool or
3. Switch the electric tool to turn
counter-clockwise to release the
blocked screw or drill bit.
Troubleshooting
Anleitung PS-AS 18-1H_SPK1 20.08.2005 9:17 Uhr Seite 10