SET-UP PROCEDURE CONTINUED ...
Step
7. LOCATE TETHERS
Locate tethers by unrolling the unit taking care to locate the black
tether straps. Most units have a series of bottom and top tethers. Please see
Supplemental Manual for exact locations of tethers.
Once you have the inflatable laid out before you, pull the tethers straight out to the sides.
Step 8.
Outdoor Anchoring and Staking. Each lie down
location must be either staked to the ground with the appropriate
stakes or if indoors, secured with sandbags. Please refer to the
Supplemental Manual for stake size and quantity for the spe
f;
ific ;l/17- 1;
unit you are setting up. Install all ground stakes 36" or taller to
I
the recommended depth. Locate your stakes so that the top
"// ·
'
tethers will be at a 50 degree vertical angle. (Approximately
}
i'
6' to 12' from inflatable depending on the size of the unit).
1
1
/_
Drive stakes into the ground in a 45 degree angle with the
(\.
head of the stake facing away from unit. Pound stakes 36' or'
larger into ground approximately 75% of stake length.
(Approximately 27' inches deep)
12405 Telegraph Road, Santa Fe Springs, CA 90670 Toll Free (800) 569-0719 • (562)777-1140 • Fax (562) 777-1161
8
www.einflatables.com
email: [email protected]
