![einflatables Slip and Splash Installation And Setup Manual Download Page 10](http://html1.mh-extra.com/html/einflatables/slip-and-splash/slip-and-splash_installation-and-setup-manual_2370104010.webp)
l
SET-UP PROCEDURE CONTINUED ...
-�
Step 11.
Adjusting Tethers. Make sure the
inflatable is perfectly level. Adjust tethers and
gather extra line to ground stakes or indoor
sandbag container. Adjusting tension is easy,
just untie the strap from the stake and re-tie
to the appropriate tension. Remember to
maintain proper tether tension during
operation. Starting with the bottom tethers,
adjust all tethers. Install all 18" stakes at this
time to all appropriate tethers. Take care to
make sure the inflatable is still facing desired direction. Use appropriate size stakes for all tethering
locations (See Supplement).
I
Make sure tether lines are not
restricting inflation. If tether lines
become too tight and impede
inflation, carefully loosen the line
TETHERS TOO
TIGHT?
until unit is inflated.
12405 Telegraph Road, Santa Fe Springs, CA 90670 Toll Free
(800)
569-0719 • (562) 777-1140 • Fax (562) 777-1161
www.einflatables.com
email: [email protected]